Skip to content
NHTSAVehicles

NHTSA recall 26V167000: Terex C6000, Terex General 65, Terex General 95 and 3 more recall: equipment

NHTSA recall 26V167000 ·

Build snapshot. Collected , once, when this site was built. It is not a live feed.

What the agency says to do

Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, 2026. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN737.
Text from NHTSA, unedited.

This page cannot tell whether your own vehicle is included or already repaired. Check your VIN at NHTSA (opens in a new tab).

Note from Recalls Watch, not agency text

Why it was recalled

Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.
Text from NHTSA, unedited.

The vehicles

Codes in the record. Click one to copy it.

Terex South Dakota, Inc. (Terex) is recalling certain 2019-2026 General 65, General 80, General 95, C4000, C5000, and C6000 digger utility trucks equipped with pole guides. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
Text from NHTSA, unedited.

Among the vehicles this site follows, NHTSA returned this campaign for (2,303 vehicles potentially affected in total):

  • 2019 Terex C6000
  • 2020 Terex C6000
  • 2021 Terex C6000
  • 2022 Terex C6000
  • 2023 Terex C6000
  • 2024 Terex C6000
  • 2025 Terex C6000
  • 2026 Terex C6000
  • 2019 Terex General 65
  • 2020 Terex General 65
  • 2021 Terex General 65
  • 2022 Terex General 65
  • 2023 Terex General 65
  • 2024 Terex General 65
  • 2025 Terex General 65
  • 2026 Terex General 65
  • 2019 Terex General 95
  • 2020 Terex General 95
  • 2021 Terex General 95
  • 2022 Terex General 95
  • 2023 Terex General 95
  • 2024 Terex General 95
  • 2025 Terex General 95
  • 2026 Terex General 95
  • 2019 Terex C5000
  • 2020 Terex C5000
  • 2021 Terex C5000
  • 2022 Terex C5000
  • 2023 Terex C5000
  • 2024 Terex C5000
  • 2025 Terex C5000
  • 2026 Terex C5000
  • 2019 Terex General 80
  • 2020 Terex General 80
  • 2021 Terex General 80
  • 2022 Terex General 80
  • 2023 Terex General 80
  • 2024 Terex General 80
  • 2025 Terex General 80
  • 2026 Terex General 80
  • 2019 Terex C4000
  • 2020 Terex C4000
  • 2021 Terex C4000
  • 2022 Terex C4000
  • 2023 Terex C4000
  • 2024 Terex C4000
  • 2025 Terex C4000
  • 2026 Terex C4000

The campaign may cover other models and years: the summary above and the official notice have the full scope.

Source

Issued by
National Highway Traffic Safety Administration
Manufacturer
Terex South Dakota, Inc.
Component
Equipment
Title
Composed by Recalls Watch from fields of the record; NHTSA records have no title.

Check all notices that name this firm in the directory of recalls by brand and manufacturer. This notice is in these lists: Month: March 2026, Week 2026-W12. Browse more vehicles recalls, or check another notice by its number in the recall number lookup.

About this recall

What is the hazard?

NHTSA states: “Without a retaining pin, the pole guide arm may fall, increasing the risk of injury to people around the truck.”

What should owners do?

NHTSA states: “Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, 2026. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for this recall is SN737.”

Is my vehicle part of this recall?

This page cannot tell. A campaign may cover only part of the production of a model. Check your VIN at nhtsa.gov/recalls.

When was this recall published?

NHTSA received the report of recall 26V167000 on March 19, 2026.