Skip to content
CPSCElectronics & appliances

Lutron Recalls Power Interfaces for LED Tape Lights Due to Shock Hazard

CPSC recall 25317 ·

Build snapshot. Collected , once, when this site was built. It is not a live feed.

Check my lot or code

Is yours in this recall?

Type the lot, batch, date code, model number or UPC printed on the product. It is compared here, in your browser, with the codes this notice lists. It stays in this page: it is not added to the address.

General information on recalls from the agency: U.S. Consumer Product Safety Commission (opens in a new tab).

What the agency says to do

Replace

Consumers should immediately stop using the recalled power interfaces and any connected lighting and turn off the power at the circuit breaker. Consumers should contact Lutron for instructions on how to receive their free replacement power interface and how it will be installed at no charge. Consumers should go to https://residential.lutron.com/us/en/safety/safety-recall to determine if their unit is included in this recall and, if so, to register to receive installation of the replacement power interface. If a unit is included, Lutron will provide the free replacement power interface and a pre-paid mailing label that the consumer can use to return the unit to Lutron.
Text from CPSC, unedited.

Contact (CPSC): Lutron toll-free at 800-239-0495 from 8 a.m. to 5:30 p.m. ET Monday through Friday, by email at productrecall@lutron.com, or online at https://residential.lutron.com/us/en/safety/safety-recall or https://www.lutron.com/us/en and click on "Safety Notices" at the bottom of the page for more information.

Note from Recalls Watch, not agency text

Why it was recalled

The power interface can fail during a significant power surge (e.g., lightning strike), posing a shock hazard to consumers if they touch the LED tape lights.
Text from CPSC, unedited.

Incidents and injuries (CPSC): None reported

The recalled product

Codes in the record. Click one to copy it.

This recall involves Lutron-branded power interfaces, model LU-PH3-B, intended for use with LED tape lights. The 96W hard-wired power interfaces were distributed alone and as part of Lumaris RGB+ tunable white LED tape light starter kits for RadioRA 3 systems (model RRL-MTK-RT-IN) and HomeWorks systems (model HWL-MTK-RT-IN).
Text from CPSC, unedited.
  • Lutron-branded power interfaces for LED tape lights

    Quantity
    About 1,944

Where it was sold (CPSC): Dealers and distributors of audiovisual (AV) equipment and electrical supplies nationwide from September 2024 through April 2025 for about $300 for the power interfaces, and between $1,250 and $1,400 for the Lumaris LEDtape light starter kits and the HomeWorks systems.

Recalled Lutron Power Interface (model LU-PH3-B)
Recalled Lutron Power Interface (model LU-PH3-B) Photo: CPSC.
  • Close up of product label on recalled Lutron Power Interface
    Close up of product label on recalled Lutron Power Interface
  • RadioRA 3 LED tape light starter kit package label lists the recalled power interface
    RadioRA 3 LED tape light starter kit package label lists the recalled power interface
  • HomeWorks LED tape light starter kit package label lists the recalled power interface
    HomeWorks LED tape light starter kit package label lists the recalled power interface

Source

Issued by
U.S. Consumer Product Safety Commission
Firm
Lutron

Check all notices that name this firm in the directory of recalls by brand and manufacturer. This notice is in these lists: Month: June 2025, Week 2025-W23. Browse more electronics & appliances recalls, or check another notice by its number in the recall number lookup.

About this recall

What is the hazard?

CPSC states: “The power interface can fail during a significant power surge (e.g., lightning strike), posing a shock hazard to consumers if they touch the LED tape lights.”

What should owners do?

CPSC states: “Consumers should immediately stop using the recalled power interfaces and any connected lighting and turn off the power at the circuit breaker. Consumers should contact Lutron for instructions on how to receive their free replacement power interface and how it will be installed at no charge. Consumers should go to https://residential.lutron.com/us/en/safety/safety-recall to determine if their unit is included in this recall and, if so, to register to receive installation of the replacement power interface. If a unit is included, Lutron will provide the free replacement power interface and a pre-paid mailing label that the consumer can use to return the unit to Lutron.”

Which products are included?

CPSC states: “This recall involves Lutron-branded power interfaces, model LU-PH3-B, intended for use with LED tape lights. The 96W hard-wired power interfaces were distributed alone and as part of Lumaris RGB+ tunable white LED tape light starter kits for RadioRA 3 systems (model RRL-MTK-RT-IN) and HomeWorks systems (model HWL-MTK-RT-IN).”

When was this recall published?

CPSC published recall 25317 on June 5, 2025.